VIMATEC PROFILITH
Description: Replaces lime in mortars. Acts as air entraining agent, plasticizer and cement setting retarder.
Consumption: For masonry and lining: 100g per 50 kg cement plaster: 200g g per 50 kg cement.
Packaging: 1,5,12,150,220 KG
Description: Replaces lime in mortars. Acts as air entraining agent, plasticizer and cement setting retarder.
Consumption: For masonry and lining: 100g per 50 kg cement plaster: 200g g per 50 kg cement.
Packaging: 1,5,12,150,220 KG
VIMATEC VIMAFLEX
Description: Offers elasticity and significant improvement of adhesion to fine cement mortars. It must be used where shrinkage/expansion or shifts of the substrate are expected.
Consumption: 0,4 - 0,5 kg per 1 kg
Packaging: 1,5, 12,20,150,220 KG
Description: Offers elasticity and significant improvement of adhesion to fine cement mortars. It must be used where shrinkage/expansion or shifts of the substrate are expected.
Consumption: 0,4 - 0,5 kg per 1 kg
Packaging: 1,5, 12,20,150,220 KG
VIMATEC VIMAPROOF M
Description: Reduces water permeability and plasticizes mortars (cement mortars, plasters) acting in a physical-chemical way. It can be used also in non reinforced concrete.
Consumption: 1,0 - 1,4% by cement weight.
Packaging: 1,5, 12,20,150,220 KG
Description: Reduces water permeability and plasticizes mortars (cement mortars, plasters) acting in a physical-chemical way. It can be used also in non reinforced concrete.
Consumption: 1,0 - 1,4% by cement weight.
Packaging: 1,5, 12,20,150,220 KG
VIMATEC WATERBLOCK RESIN
Description: Inorganic brushable waterproofing mortar in powder
Consumption: ±2.5 Kg / m²
Packaging: 8,150 KG Download: Technical Sheet
Description: Inorganic brushable waterproofing mortar in powder
Consumption: ±2.5 Kg / m²
Packaging: 8,150 KG Download: Technical Sheet
EVERFAST CIMENFIX
Description: Synthetic latex emulsion. Gives fresh mortars high adherence and allows for substantial reduction of the mixing water. Used for making clean smooth concrete substrates, delicate gluing, cleaning and finishing off and for the rejoining of old and new coverings.
Consumption: 2.5 to 10 Kg per bag of cement according to the use.
Packaging: 220 Kg drums,30 Kg jerrycans, 5 Kg - 2 Kg cans Download: Technical Sheet
Description: Synthetic latex emulsion. Gives fresh mortars high adherence and allows for substantial reduction of the mixing water. Used for making clean smooth concrete substrates, delicate gluing, cleaning and finishing off and for the rejoining of old and new coverings.
Consumption: 2.5 to 10 Kg per bag of cement according to the use.
Packaging: 220 Kg drums,30 Kg jerrycans, 5 Kg - 2 Kg cans Download: Technical Sheet
EVERFAST CIMENTEX
Description: High quality bonding agent. Styrene butadiene type synthetic latex emulsion. Gives fresh mortars high adherence and allows for substantial reduction of the mixing water. In addition to the applications of CIMENFIX, CIMENTEX is used for making waterproof concrete and mortars, tanking, water tanks, swimming pools, etc.
Consumption: 2 to 5 L per bag of cement according to the use.
Packaging: 220 L drums,30 L jerrycans ,5 L - 2 L cans Download: Technical Sheet
Description: High quality bonding agent. Styrene butadiene type synthetic latex emulsion. Gives fresh mortars high adherence and allows for substantial reduction of the mixing water. In addition to the applications of CIMENFIX, CIMENTEX is used for making waterproof concrete and mortars, tanking, water tanks, swimming pools, etc.
Consumption: 2 to 5 L per bag of cement according to the use.
Packaging: 220 L drums,30 L jerrycans ,5 L - 2 L cans Download: Technical Sheet
EVERFAST HYDROL NF1
Description: Waterproof liquid agent with a plasticizing effect for concrete and mortars. Used in all concrete works requiring impermeability, up to 1 % of cement weight.
Consumption: 0.5 L per bag of cement (1% of the weight of the cement) 1L = 2 bags of cement.
Packaging: 220 L drums, 30 L jerrycans ,5 L - 2 L cans Download: Technical Sheet
Description: Waterproof liquid agent with a plasticizing effect for concrete and mortars. Used in all concrete works requiring impermeability, up to 1 % of cement weight.
Consumption: 0.5 L per bag of cement (1% of the weight of the cement) 1L = 2 bags of cement.
Packaging: 220 L drums, 30 L jerrycans ,5 L - 2 L cans Download: Technical Sheet
EVERFAST HYDROP
Description: Waterproof agent in pre-dosed powder form for concrete and mortar. Used for making foundations, tunnels, water tanks, underground car parks, etc.
Consumption: 1 dose per 35 Kg bag of cement.
Packaging: Dose for a 35 Kg bag of cement. Download: Technical Sheet
Description: Waterproof agent in pre-dosed powder form for concrete and mortar. Used for making foundations, tunnels, water tanks, underground car parks, etc.
Consumption: 1 dose per 35 Kg bag of cement.
Packaging: Dose for a 35 Kg bag of cement. Download: Technical Sheet
EVERFAST JOINFLEX
Description: Admixture formulated for making flexible cement. Used for the treatment of masonry joints, concrete, floor tiles, bricks, wood, etc. Can be painted.
Consumption: Mix ratio of 1 to 2 in weight with the cement 1 cm x 1 cm, about 0.60 to 120 g of mixture depending on chosen joint.
Packaging: 220 Kg drums, 25 Kg jerrycans, 5 Kg - 2 Kg cans Download: Technical Sheet
Description: Admixture formulated for making flexible cement. Used for the treatment of masonry joints, concrete, floor tiles, bricks, wood, etc. Can be painted.
Consumption: Mix ratio of 1 to 2 in weight with the cement 1 cm x 1 cm, about 0.60 to 120 g of mixture depending on chosen joint.
Packaging: 220 Kg drums, 25 Kg jerrycans, 5 Kg - 2 Kg cans Download: Technical Sheet
SATECMA HIDROFUGO 2000
Description: Yellow coloured, chloride free, pasty admixture in dispersion, with 1,0 kg/l density, which is especially recommended as admixture for the mixing water when waterproofing mortars and concrete.
Consumption: 0.5 Kg/m²
Packaging: 30,60 KG Download: Technical Sheet
Description: Yellow coloured, chloride free, pasty admixture in dispersion, with 1,0 kg/l density, which is especially recommended as admixture for the mixing water when waterproofing mortars and concrete.
Consumption: 0.5 Kg/m²
Packaging: 30,60 KG Download: Technical Sheet
SATECMA CRYLADIT
Description: Made of modified acrylic polymers, designed for being used as mixing admixture in Portland cement mortars, improving the properties of hardness and adherence to surfaces made of concrete, brick, stone, etc.
Consumption: 1.5 L/sack
Packaging: 25,60 L Download: Technical Sheet
Description: Made of modified acrylic polymers, designed for being used as mixing admixture in Portland cement mortars, improving the properties of hardness and adherence to surfaces made of concrete, brick, stone, etc.
Consumption: 1.5 L/sack
Packaging: 25,60 L Download: Technical Sheet